not available for new designs gpp100d, GPP100G, gpp100j, gpp100k, gpp100m www.vishay.com vishay general semiconductor revision: 14-aug-13 1 document number: 89952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated junction plastic rectifier features ? glass passivated chip junction ? low forward voltage drop ? low leakage current, typical i r less than 0.2 a ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in general purpose rect ification of power supplies, inverters, converters, and free wheeling diodes application. mechanical data case: p600, molded epoxy over passivated junction ? molding compound meets ul 94 v-0 flammabi lity rating ? base p/n-e3 - rohs-co mpliant, commercial grade ? base p/nhe3 - rohs-compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: 40 ms pulse width, primary characteristics i f(av) 10 a v rrm 200 v, 400 v, 600 v, 800 v, 1000 v i fsm 440 a v f at i f = 10 a 1.05 v i r 5.0 a t j max. 175 c package p600 diode variations single die p600 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol gpp100d GPP100G gpp100j gpp100k gpp100m unit maximum repetitive pe ak reverse voltage v rrm 200 400 600 800 1000 v maximum rms voltage v rms 140 280 420 560 700 v maximum dc blocking voltage v dc 200 400 600 800 1000 v maximum average forward rectified current ? 0.375" (9.5 mm) lead length at t a = 50 c i f(av) 10 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 440 a operating junction and storage temperature range t j , t stg - 55 to + 175 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol gpp100d GPP100G gpp100j gpp100k gpp100m unit maximum instantaneous forward voltage i f = 10 a v f (1) 1.05 v maximum reverse current rated v r t a = 25 c i r 5.0 a t a = 100 c 100 typical reverse recovery time i f = 0.5 a, i r = 1.0 a, ? i rr = 0.25 a t rr (2) 5.5 s typical junction capacitance 4.0 v, 1 mhz c j 110 pf free datasheet http://www.0pdf.com
not available for new designs gpp100d, GPP100G, gpp100j, gpp100k, gpp100m www.vishay.com vishay general semiconductor revision: 14-aug-13 2 document number: 89952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) leads clipped at 3 mm lead length from plastic body on 7.0 cm x 2.2 cm x 1.9 cm x 2 heatsink note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol gpp100d GPP100G gpp100j gpp100k gpp100m unit typical thermal resistance r ? ja (1) 20 c/w r ? jl (1) 4.0 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode gpp100j-e3/54 2.0 54 800 13" diam eter paper tape and reel gpp100j-e3/73 2.0 73 300 ammopack packaging gpp100jhe3/54 (1) 2.0 54 800 13" diameter paper tape and reel gpp100jhe3/73 (1) 2.0 73 300 ammopack packaging 0 0 2 4 6 8 10 12 25 50 75 100 125 150 175 ambient temperature (c) average forward current (a) average forward current (a) average power lo ss (w) 5 6 7 8 9 10 11 0 1 2 3 4 5 0 1 2 3 4 5 6 7 8 9 10 11 12 d = 0.5 d = 0.3 d = 0.2 d = 0.1 d = 0.05 d = 0.8 d = 1.0 d = t p /t t p t 10 100 1 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) t a = 100 c t a = 125 c t a = 150 c t a = 25 c t a = 85 c t a = 175 c 50 100 100 10 10 0.01 20 30 40 60 70 80 90 0.1 1 1000 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (ma) t a = 150 c t a = 25 c t a = 100 c t a = 85 c t a = 125 c t a = 175 c free datasheet http://www.0pdf.com
not available for new designs gpp100d, GPP100G, gpp100j, gpp100k, gpp100m www.vishay.com vishay general semiconductor revision: 14-aug-13 3 document number: 89952 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical j unction capacitance package outline dimensions in inches (millimeters) 10 1 100 10 100 1000 0.1 rever s e voltage (v) junction capacitance (pf) t j = 25 c f = 1.0 mhz v s t g = 50 mv p-p 0.052 (1.32) 0.048 (1.22) 0.360 (9.1) 0.340 (8.6) dia. 1.0 (25.4) min. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) min. p600 free datasheet http://www.0pdf.com
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. free datasheet http://www.0pdf.com
|
